|Electrical Connection||400V. 3ph.50HZ|
|Spindle Motor||3.75 kW (5 Hp)|
|Table Size LxW (mm)||1370 x 254|
|Table Slot Size (mm)||16mm / 3|
|Table Travel (Long) (mm)||920 (820)|
|Table ‘X’ Long.Feed inf. Variable||0-740mm/min|
|Saddle Travel (Cross) (mm)||410 (370)|
|Table ‘Y’ Cross.Feed inf. Variable||0-730mm/min|
|Knee Travel (Vertical) (mm)||400|
|‘Z’ Vertical Feed (Knee)||350mm/min|
|Quill Travel (mm)||127|
|Ram Travel (mm)||470|
|Spindle Taper||ISO 40|
|Quill Power Feeds (3)||0.04, 0.08, 0.15 mm/rev|
|Spindle Speeds (Rpm)||65 – 3750|
|Spindle to Table (mm)||0 – 400|
|Spindle to Column (mm)||110 – 455|
|Head Tilts L/R||± 90°|
|Head Tilts F/B||± 45°|
|Dims (LxWxH) cm||182 x 169 x 223|
Excel ETM 4VS Turret Milling Machine (3Ph 400V)
£11,629 Ex.VAT / £13,954.80 In.VAT
Free Delivery on all orders over £50 Ex.VAT to UK Mainland
- Versatile Machine for drilling – milling & boring operations.
- Heavy duty & sturdy machine made with a generous size meehanite casting.
- Rated for continuous use & long life expectancy.
- Made to accurate engineering tolerances by highly skilled engineers during manufacture.
- 5 HP Motor allows larger cuts to be taken during production runs.
- ISO 40 spindle allows a large selection of standard tooling to be used.
- Automatic stop to up/down feed at the end of the preset travel.
- Angular positioning to left/right through worm & gear for ease.
- Reversible switch allows the spindle to run clockwise & anti-clockwise.
- Centralised one shot lubrication ensures lubrication to all parts that are otherwise inaccessible.
- DRO allows you to work in either imperial or metric calibrations.
- Hardened slide ways give the machine a much longer production life.
- Quill feed at 3 rates of Feed give you the option to select the correct feed to quill to
suit your individual production requirements.
- Servo type variable & rapid feeds are available for both longitudinal & cross feeds.
- Electrically Interlocked spindle guard conforms to the latest CE
regulations & health & safety standards.
- 3 Axis DRO
- Power Feed to Quill-3 rate
- Servo Type Feed & Rapid for Long. & Cross.
- Motorised Up & Down Movement
- One Shot Lubrication
- Coolant System
- Electrically Interlocked Spindle Guard
- Large Size Base Tray
- Low Volt Machine Light
- 3 Axis DRO
This item can be placed on a back-order from our supplier, however its delivery time will be significantly longer than usual. Please call us on 0247 636 5255 for stock availability before ordering.