No products in the basket.
Optimum OPTIturn TH 5615D Heavy Duty Precision Centre and Spindle Manual Lathe (3 Phase 400v)
£25,721.00 Ex.VAT / £30,865.20 In.VAT
📦 Estimated Delivery Date - 26.12.2023.
Free Delivery to Mainland UK!
Features:
- Hardened and ground Z-axis guideway
- Spindle mount Camlock DIN ISO 702-2 No. 8
- Precisely crafted sled
- Handwheels with adjustable fine scale 0.04 / 0.02 mm
- All guides can be adjusted by wedge strips
- Waves and wheels running in oil bath
- Adjustment range upper slide ± 90 °
- Guaranteed concentricity of the spindle nose better than 0.015 mm
- Main spindle running in oil bath
- Gear wheels smooth, hardened and ground with 2 adjustable precision tapered roller bearings
- Clear selection lever for switching the feed rates
- Closed design of the rapid-action feed gear
- Gears and shafts hardened and ground in an oil bath in precision bearings
- Handwheels decoupled and tested according to EN 23125
- Two-channel right-left switch tested to EN 23125
- Switch with life cycle calculation, tested according to EN ISO 13849
- Right / left rotation on bed carriage via switching spindle switchable
- Central lubrication in the bed slide
- Leading spindle
- Emergency stop blow switch, motor protection switch, lockable main switch
- Emergency stop device with foot control
- Safety handwheels with release function in the X and Z axis
- Tailstock for taper turning ± 10 mm adjustable
- Tailstock quill and hand wheel with adjustable fine scale 0.025 mm
- Fast, easy and tool-free adjustment by means of a clamping lever
- Strongly ribbed prism bed, induction hardened and precision ground from gray cast iron
- Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN
- LED machine lamp in chip protection
- Electrics with Siemens components
- Energy chain for gentle line and hose routing
- Adjustable scale of the threaded clock
- Quick change steel holder SWH 7-C
- 1 steel holder 32 x 150 type D for square chisel 25 mm
Optimum OPTIturn TH 5615D Heavy Duty Precision Centre and Spindle Manual Lathe
Technical Data
| Dimensions and weights | |||
| Length (product) approx. | 2950mm | Height (product) approx. | 1650mm |
| Width/depth (product) approx. | 1150mm | Net weight approx. | 2300kg |
| Work areas | |||
| Max. height | 280mm | Swing diameter above planing slide | 355mm |
| Max. width | 1420mm | Turning length in bed bridge | 170mm |
| Swing diameter above machine bed | 560mm | Bed width | 350mm |
| Swing diameter in bed bridge | 790mm | ||
| Speed range | |||
| Number of gears | 12 | Speed range | 25 – 1600min¯¹ |
| Electric Data | |||
| Drive motor output | 7.5kW | Current type | AC |
| Supply voltage | 400V | Mains frequency | 50Hz |
| Phase(s) | 3Ph | ||
| Spindle | |||
| Spindle chuck | Camlock DIN ISO 702-2 No. 8 | Spindle bore/rod passage diameter | 80mm |
| Spindle cone | MT 7 | Tool holder max. chuck height | 25mm |
| Tailstock | |||
| Tailstock chuck | MT 5 | Tailstock quill diameter | 75mm |
| Tailstock quill stroke | 180mm | ||
| Pitches | |||
| Metric pitch | 0.2 – 14mm/rev | Diametrical pitch | 4 – 112DPI |
| Number of metric pitches | 47 | Number of diametrical pitches | 50 |
| Imperial pitch | 112 – 2Threads/1″ | Modular thread pitch | 0.1 – 7mm/rev |
| Number of imperial pitches | 60 | Number of modular thread pitches | 34 |
| Travel | |||
| Travel X axis | 130mm | Travel Z axis | 316mm |
| Feed | |||
| Longitudinal feed range | 0.059 – 1.646mm/rev | Flat feed range | 0.020 – 0.573mm/rev |
| Number of longitudinal feeds | 35 | Number of flat feeds | 35 |
| Electrical connections | |||
| Total rated value | 8.5kW |
| Weight | 2300 kg |
|---|---|
| Brand |
Book a Demo
We understand that finding the right machine can be difficult, especially if your looking for a high level of technical specification. That’s why it’s possible to visit our Coventry Showroom to see our wide range of machines in action.
Our Showroom is a dedicated area within our warehouse which allows us to power machines on our trained engineers to demonstrate them. Demonstrations are by appointment only at: Colliery Lane, Exhall, Coventry CV7 9NW United Kingdom
Machines we have available for demonstration
| Machine Type | Model On Display |
| Circular Saws | CS360 |
| ECS 315 | |
| ECS 250 | |
| Grinders, Sanders & Linishers | GR W202 |
| Optimum OptiGrind GZ25DD | |
| Optimum Opti Grind BSM 150 | |
| Optimum OptiGrind GU20 | |
| MetalKraft MBSM 75-200-1 | |
| BDG69 | |
| Milling Machines | ETM 3VS |
| ETM 2VS | |
| Drill Mill | MH 25V |
| MH 50V | |
| Drills | RD1000 |
| Optimum OptiDrill DH 45G | |
| Optimum OptiDrill DH 35G | |
| Opti B 50GSM | |
| Lathes | Optimum Optiturn TH42100 |
| Optimum OptiturnTU 3610V | |
| Optimum Optiturn D460 |
Related products
Heavy Duty Lathes
£19,521.00 Ex.VAT / £23,425.20 In.VAT
£37,521.00 Ex.VAT / £45,025.20 In.VAT
VIdeo
Heavy Duty Lathes
£20,390.00 Ex.VAT / £24,468.00 In.VAT
Popular
Heavy Duty Lathes
£31,850.00 Ex.VAT / £38,220.00 In.VAT
Heavy Duty Lathes
£25,259.00 Ex.VAT / £30,310.80 In.VAT
Heavy Duty Lathes
Optimum OPTIturn TX 5216V Heavy Duty Variable Speed Manual Lathe
£34,490.00 Ex.VAT / £41,388.00 In.VAT
£41,821.00 Ex.VAT / £50,185.20 In.VAT
Video
Heavy Duty Lathes
£20,390.00 Ex.VAT / £24,468.00 In.VAT